Avoid overspray in the injection mold release: be sure to wait until the solvent has evaporated before spraying. In general, in large factories, injection mold release agents are often required. If you want to know more about the injection molding process and you want to find the mold manufacturer, you can consult the 'mold manufacturer', the mold company has The professional team, the quality of the products produced is guaranteed, and the buyer is assured. So, how to solve the above two problems? Let's take a look at the plastic mold factory:
The correct way to use the injection mold dry release agent is to make sure that the product model is consistent with the use, shake the bottle evenly, from the spray nozzle Press the valve evenly at 25-30 cm to spray evenly. The distance between the plastic product and the nozzle is kept at 25-30 cm.Why do injection mold release agents get on plastic products? Why is the injection mold release agent applied to the plastic product? That is because the injection mold release agent is not only used for demoulding on the metal surface mold, PET bottle blowing Machines but also for the mold release on the plastic surface. Due to the large amount of use, they are generally sold to manufacturers..
The above is the reason why the injection mold release agent will be stained on the plastic product and the solution. Then, how can the injection mold release agent be applied to the plastic product that is injected? What is the cause? Or the method of using the injection mold release agent is wrong or the injection molding agent is too much
How to clean the plastic mold exhaust slot? After injection molding, many plastics tend to leave a small amount of residue on the surface of the exhaust groove of the plastic mold, something like plastic powder., Ltd. Hengxingchang Mould Co. For example, if the parting surface is a curved surface or a beveled surface, it may be directly vented due to the precision of the processing, and it is not necessary to process the venting groove on the parting surface of the plastic mold. When the time is long, after a long period of time, these residues will block the mold venting groove, making gas discharge difficult. reminds you that the exhaust vent of plastic molds should be cleaned regularly